News Center

——

Home page

Operating Rules for High Temperature Shuttle Kiln

2022-07-28

Operating Rules for High Temperature Shuttle Kiln

1. Foreword

High temperature shuttle kiln is an important heat treatment equipment in the industrial field. In order to ensure the safety of operation and the normal operation of the equipment, the operation process of high temperature shuttle kiln is described in detail in this regulation.

Preparation before 2. operation

1. Check the temperature in the kiln to ensure that it has dropped to a safe temperature.
2. Check the sealing condition of the kiln and kiln door to ensure that there is no debris and damage.
3. Check the atmosphere in the kiln to ensure that the process requirements are met.
4. Check whether the electrical system, instrument and control system are working properly.

3. start operation

1. Open the kiln door and put the materials to be processed into the kiln.
2. Close the kiln door to ensure a good seal.
3. Set the temperature, atmosphere and other parameters according to the process requirements.
4. Start the heating system and gradually increase the temperature in the kiln.

4. operation

1. Monitor the temperature, atmosphere and other parameters in the kiln to ensure that it is stable within the set process range.
2. Regularly check the operating status of the kiln body and auxiliary equipment. If there is any abnormality, it should be handled and recorded in time.
3. If necessary, adjust the position of the materials in the kiln to ensure uniform heating.

5. shutdown operation

1. According to the process requirements, gradually reduce the temperature in the kiln.
2. After the temperature in the kiln drops to a safe range, turn off the heating system.
3. Open the kiln door and take out the processed materials.

6. considerations

1. Operators should be familiar with the equipment performance and operating procedures, and can only be on duty after being trained and qualified.
2. Overtemperature operation is strictly prohibited to avoid equipment damage and safety accidents.
3. Regularly check the wear and tear of the kiln and auxiliary equipment, and repair or replace it in time.
4. During operation, it is strictly prohibited to touch high temperature parts to avoid scalding.
5. Keep the kiln clean to avoid impurities affecting product quality.
6. When the high temperature shuttle kiln is not used for a long time, the main power supply should be turned off and dust prevention measures should be taken.

7. Maintenance and Maintenance

1. Regularly repair and maintain the kiln body, heating elements and control system.
2. Keep the kiln and ancillary equipment clean to prevent dust and oil.
3. Regularly check the sealing of the kiln door, and replace it in time if it is damaged.

8. closing remarks

Following this operating procedure can ensure the safe operation of the high-temperature shuttle kiln and the safety of the operators. If you have any questions or find any abnormalities, please contact relevant personnel or professional maintenance personnel in time.